TI Mfg. A Series Center Latch Elevator

Relative Links

Information:

Size Range:
2-3/8”-7-5/8”

Weight:
2,000 lb.

Comments:

None at this time

2-3/8" to 11-1/4" • 65 Ton to 150 TonTI Mfg, TA150 A Series, Elevator shown -In-stock, ready to deliver

Texas International Oilfield Tools (TIOT) offers “A” series center latch collar type elevators for handling drill pipe and casing. See Specifications table on page 5 for load capacity and size ranges. “A” series elevators should only be used with square shoulder tubular. The elevator is designed with two (2) halves of similar weights for good balance and easier opening and closing. Elevators are equipped with a latch and latch lock combination. To open, pull the latch lock handle out and swing the elevator apart. An extra handle at the rear of the elevator allows for easier, safer operation. The latch and latch lock secures automatically when the elevator is closed around the pipe.

Use the ears for lifting elevator – NOT the handles


The terms VARCO, VARCO-BJ, and BJ are trademarks of Varco I/P, Inc., National Oilwell Varco, L.P., or their affiliates. Texas International Oilfield Tools is not an authorized distributor of any Varco I/P or NATIONAL OILWELL VARCO product. Texas International Oilfield Tools is not affiliated with Varco I/P, Inc., National Oilwell Varco, L.P., or their affiliates. Varco I/P, Inc., National Oilwell Varco, L.P., and their affiliates do not endorse any Texas International Oilfield Tools' products or replacement parts.