TI Mfg. SJX Single Joint Elevator

Relative Links

Information:

Part No:
T504929‐XXX - 2-3/8"- 4-1/2"
T504931‐XXX - 4-1/2- 7"
T504933‐XXX - 7-5/8"- 9-5/8"
T504935‐XXX - 10"-14"
BC= Bore code shown as XXX above

Size Range:
2-3/8”-14” - 5 Ton

Comments:

None at this time

2-3/8" to 14" • 5 Ton

The SJX elevator has two hinges that enable easy use with most Casing Running tools as it opens from either side. The SJX can also be used as a standalone elevator to hoist casing pipe. To prevent dropping lock key pins into the well, they are fastened into the elevator halves. Lock screws keep the lock key pins in the locked position during operation.

Lifting eyes are strategically placed to avoid picking up the tubular with the elevator inverted. Handles facilitate easy and ergonomic operator use. Handles casted with pins prevent shackle rotation that can result in wedging the elevator underneath the casing coupling during hoisting. The casted pins are a safety feature as they prevent possible pinching hazard for the operator during installation and use.

 


The terms VARCO, VARCO-BJ, and BJ are trademarks of Varco I/P, Inc., National Oilwell Varco, L.P., or their affiliates. Texas International Oilfield Tools is not an authorized distributor of any Varco I/P or NATIONAL OILWELL VARCO product. Texas International Oilfield Tools is not affiliated with Varco I/P, Inc., National Oilwell Varco, L.P., or their affiliates. Varco I/P, Inc., National Oilwell Varco, L.P., and their affiliates do not endorse any Texas International Oilfield Tools' products or replacement parts.


ALT NAME
ALT NAME
ALT NAME