TI Mfg. Drill Collar Slips (DCS)


Relative Links

Information:

Part No:
DCS-S - R -L - T25XX*
 *xx - denotes size ordered

Size Range:
DCS-S - 3"-4-7/8"
DCS-R - 4-1/2 "-7"
DCS- L -5-1/2 "-14"

Weight:
determined by size ordered

Comments:

None at this time

3" to 14" • Rotary ToolsTI Mfg. UC3 Casing Slip 7" to 36"

Texas International manufactured Drill Collar Type Slips (DCS) grip drill collar pipe with multiple segments and button inserts. Buttons are circular with no exposed edges that can fracture and chip.

Slips hold the string weight in place, acting as a wedge. The slips and inserts are easily changed. To set slips, position the string above the rotary and let it stop completely. Put the slips into the bowl and gradually shift the string weight from the elevator to the
slips.

If the pipe is quickly dropped into the slips, the slips will be overloaded and damaged. The slips can also be damaged by side to side pipe movement.

The load causes the slips to set and wedge into the bowl, gripping the pipe. To remove slips, hold up the slip handles as the pipe is raised, letting the slips stay on the raised pipe. When slips are above the bowl, push the handles down or pull rear handle, removing slips

Call Texas International Oilfield Tools for more information (888) 318-0703.

We carry hard-to-find parts, will customize for you.

The terms VARCO, VARCO-BJ, and BJ are trademarks of Varco I/P, Inc., National Oilwell Varco, L.P., or their affiliates. Texas International Oilfield Tools is not an authorized distributor of any Varco I/P or NATIONAL OILWELL VARCO product. Texas International Oilfield Tools is not affiliated with Varco I/P, Inc., National Oilwell Varco, L.P., or their affiliates. Varco I/P, Inc., National Oilwell Varco, L.P., and their affiliates do not endorse any Texas International Oilfield Tools' products or replacement parts.